Síntesis de perovskitas basadas en Ni y Fe vía SCS con radiación microondas y su empleo en el reformado seco de metano
Synthesis of perovskites based on Ni and Fe from SCS with microwave radiation and its use in dry methane reforming
Resumen
Se sintetizaron óxidos mixtos tipo perovskitas La0,7Sr0,3Ni1-xFexO3 (x = 1.0- 0.7- 0.5- 0.3- 0.0), a partir del método de combustión en solución, SCS, en presencia de glicina y con radiación microonda. Estos materiales se caracterizaron a partir de 1) análisis estructurales empleando la difracción de rayos X, DRX y la espectroscopia infrarroja con transformada de Fourier, FTIR y 2) análisis texturales por fisisorción de nitrógeno (método B.E.T.) para la elaboración de las isotermas de adsorción. La DRX en polvo confirmó la presencia de una fase cristalina mayoritaria (perovskita bimetálica ortorrómbica) y, además, que el tamaño de los dominios cristalinos en estas perovskitas está por debajo de los 100 nm. Las isotermas obtenidas presentan la forma tipo II y un ciclo de histéresis tipo H3. El test catalítico mostró que las conversiones de metano aumentan con la temperatura y con el contenido de níquel en la estructura del material, debido a un efecto sinergético entre los metales en la estructura de la perovskita. El sólido con el mejor performance para el RSM fue el sólido P/NiFe-3, quien presentó un 89.16 % de conversión CH4 y un 89.84 % de selectividad hacia syngas a 700°C.
Perovskite-type mixed oxides La0.7Sr0.3Ni1-xFexO3 (x = 1.0- 0.7-0.5-0.3-0.0) were synthesized, from the combustion method in solution, SCS, in the presence of glycine and with microwave radiation. These materials were characterized from 1) structural analyzes using X-ray diffraction, DRX and infrared spectroscopy with Fourier transform, FTIR and 2) textural analyzes by nitrogen fisisorption (BET method) for the preparation of adsorption isotherms . The powdered DRX confirmed the presence of a majority crystalline phase (orthorhombic bimetallic perovskite) and, in addition that the size of the crystalline domains in these perovskites is below 100 nm. The isotherms obtained have the type II form and a hysteresis cycle type H3. The catalytic test showed that conversions of methane increase with temperature and with the nickel content in the structure of the material, due to a synergistic effect between the metals in the perovskite structure. The solid with the best performance for the RSM was the solid P/NiFe-3, which presented 89.16 % CH4 conversion and 89.84 % selectivity towards syngas at 700 °C.
Palabras clave
Texto completo:
PDF
Todos los documentos publicados en esta revista se distribuyen bajo una
Licencia Creative Commons Atribución -No Comercial- Compartir Igual 4.0 Internacional.
Por lo que el envío, procesamiento y publicación de artículos en la revista es totalmente gratuito.
![]() |
![]() | ![]() | ![]() | ![]() |